Sign In | Join Free | My udpf.com
China Guangzhou HongCe Equipment Co., Ltd. logo
Guangzhou HongCe Equipment Co., Ltd.
We provide you with industry leading test equipment, advanced online system and solutions–anywhere in the world.
Verified Supplier

12 Years

Home > IP Testing Equipment >

IPX3 / IPX4 Spraying And Splashing Water IP Testing Equipment R800 Oscillating Tube

Guangzhou HongCe Equipment Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

IPX3 / IPX4 Spraying And Splashing Water IP Testing Equipment R800 Oscillating Tube

  • 1
  • 2
  • 3

Brand Name : HongCe

Model Number : HH0802

Certification : calibration certificate (cost additional)

Place of Origin : China

MOQ : 1 set

Price : Negotiatable

Payment Terms : T/T

Supply Ability : 10 set /month

Delivery Time : 45 days

Packaging Details : Plywood

Standard : IEC60529, IEC 60335-1 and etc

Warranty : 1 Year

Control : PLC intelligent control

Needle hole : Φ0.4mm

turntable diameter : 600mm

Included angle of two holes : IPX3: 120°; IPX4: 180°

Tube radius : 200~1600mm

Water flow : 1-10L/min adjustable

Contact Now

IPX3/IPX4 Spraying And Splashing Water IP Testing Equipment R800 Oscillating Tube

Standard of IP Testing Equipment:

IEC 60529: 2013 Degrees of protection provided by enclosures (IP Code)

Application:

Test for second characteristic numeral 3 & 4 with oscillating tube. We offer chamber type and open type for IPX3/4 spraying and splashing test equipment.

Feature of IP Testing Equipment:

The total flow rate is adjusted and is measured with a flow meter.

The oscillating tube is provided with spray holes over an arc of 60° either side of the centre point.

The enclosure to be tested is placed at the centre point of the semicircle. The tube is caused to oscillate through an angle of 120°, 60° on either side of the vertical, the time for one complete oscillation (2 × 120°) being about 4 s and the test duration being 5 min.

The enclosure is then turned through an horizontal angle of 90° and the test is continued for a further 5 min.

The maximum acceptable radius of the oscillating tube is 1600mm.

Parameter of IP Testing Equipment:

Item Parameters
Input power Single-phase AC220V,50Hz
Water supply

Water flow rate>10L/min±5% clean water without inclusion.

This device is equipped with clean water filtration unit

Control and operation PLC intelligent control, 7 inch color touch screen operation
The size of the oscillating tube R200 ,R400,R600,R800,R1000,R1200,R1400,R1600mm. Optional,stainless steel
Needle hole Φ0.4mm
Included angle of two holes IPX3:120°; IPX4:180°
Pendulum angle IPX3:120°(±60°); IPX4:350°(±175°)
Raining speed

IPX3:4 s/time(2×120°);

IPX4:12 s/time(2×350°);

Water flow 1-10L/min adjustable
Testing time 0.01S~99hours 59min,can be preset
Rotary plate Diameter:Φ600mm;Rotate speed:1r/min,Can be paused at four aspects, Load bearing≤50㎏electrical equipment
Site requirements

Dedicated IP waterproof test room,The ground should be flat with illumination

10A waterproof leakage switch(or socket)used for equipment. With good function of inflow and drainage. Ground installation

Area covered It is set according to the selected oscillating tube

IPX3 / IPX4 Spraying And Splashing Water IP Testing Equipment R800 Oscillating Tube

IPX3 / IPX4 Spraying And Splashing Water IP Testing Equipment R800 Oscillating Tube


Product Tags:

Splashing Water IP Testing Equipment

      

R800 Oscillating Tube IP Testing Equipment

      
Best IPX3 / IPX4 Spraying And Splashing Water IP Testing Equipment R800 Oscillating Tube wholesale

IPX3 / IPX4 Spraying And Splashing Water IP Testing Equipment R800 Oscillating Tube Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Guangzhou HongCe Equipment Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)